Ingen varer i handlekurven.
Du er nå her:
Klassisk radiomikrofon - men også genial på basstromme eller trompet.
SM7B har i senere tid fått en betydelig renessanse. Den er mange studio og PA-teknikeres problemløser, fordi SM7B gir en helt særegen nær og varm lyd.
Brukes blant annet til radio, vokal, instrument, PA, basstromme. Shure SM7B kan man ofte se i bruk til vokal i studio, hvor dyre rørmikrofoner står ubrukt ved siden av. Den er også suveren til trompet.
Shure SM 7B ble opprinnelig designet for bruk i radiostudio, men er i dag også kjent for å være en problemløser for vokalopptak i studio. I kombinasjon med en god mikrofonforsterker, sitter vokalen i miksen som spikret midt mellom høyttalerne.
The Versatile & Flexible Mic!
The SM7B is a dynamic microphone with a very smooth, flat, wide-range frequency response. It is meticulously designed for the most exacting music and speech requirements in professional audio applications. The cartridge has been updated from the original SM7B with improved shielding against electromagnetic hum generated by computer monitors, neon lights, and other electrical devices. A popular choice for broadcast applications, the SM7B is often seen in studio situations parked above hi-hats, in front of bass cabinets, and as a vocal mic for rock vocalists. The SM7B excels on many fronts!
Features
- Flat, wide-range frequency response for exceptionally clean and natural reproduction of both music and speech
- Bass rolloff and mid-range emphasis (presence boost) controls with graphic display of response setting
- Improved rejection of electromagnetic hum, optimized for shielding against broadband interference emitted by computer monitors
- Internal "air suspension" shock isolation virtually eliminates mechanical noise transmission
- Highly effective pop filter eliminates need for any add-on protection against explosive breath sounds, even for close-up vocals or narration
- Now shipping with the A7WS detachable windscreen, designed to reduce plosive sounds and gives a warmer tone for close-talk vocals
- Yoke mounting with captive stand nut for easy mounting and dismounting provides precise control of microphone position
- Classic cardioid polar pattern, uniform with frequency and symmetrical about axis, to provide maximum rejection and minimum coloration of off-axis sound
- Rugged construction and excellent cartridge protection for outstanding reliability
Broadcast Standard
The SM7B is often seen in radio studios, as its designed to fare well in a broadcast environment. The A7WS windscreen reduces plosive sounds and gives a warmer tone for close-up vocals or narration. The cartridge has been updated from the original SM7B with improved shielding against electromagnetic hum generated by computer monitors, neon lights, and other electrical devices.
Versatile
In recent years, the SM7B has seen time in front of rock vocalists and also does an excellent job of handling low-frequency instruments such as bass guitar. The SM7B has also proven successful on unlikely sources such as hi-hat.
Rugged Reliability
Like all Shure mics, the SM7B is built like a tank, meaning that you can travel with it from gig to gig and rest assured that it will last. Shure mics are famous for their bulletproof construction, and the SM7B is no exception. Night after night, the SM7B will perform on stage and in the studio!
| Type | Dynamic | |
| Polar Pattern | Cardioid (unidirectional) | |
| Impedance | Microphone impedance rating is 150 ohms (150 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms. | |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3. | |
| Output Level (at 1,000 Hz) | Open Circuit Voltage*: -59.0 dB (1.12 mV) *0 dB = 1 volt per Pascal |
|
| Electromagnetic Hum Sensitivity | 60 Hz: 11 dB 500 Hz: 24 dB 1 kHz: 33 dB |
|
| Switches | Bass rolloff and mid-range emphasis: Slotted response selector switches. See Figure 3 in User Guide for bass rolloff and mid-range emphasis (presence boost) response. | |
| Cartridge Shock Mount | Internal air-suspension shock and vibration isolator. | |
| Microphone Connector | Three-pin professional audio (XLR) | |
| Swivel Assembly | Integrated, captive nut for ease of attachment to stand, fits 5/8 in.-27 thread. | |
| Case | Dark gray enamel aluminum and steel case with dark gray foam windscreen. | |
| Net Weight | 765.4 grams | |
