Ingen varer i handlekurven.
Du er nå her:
AT4021 tilbyr en flat, utvidet frekvensrespons, høyt maks. SPL og stort dynamikkområde. AT4021`s
lave egenstøy passer perfekt sammen med selv det mest sofistikerte opptaksutstyr. AT4021`s lavmasse
membran forbedrer transientgjengivelsen og minimerer følsomheten for håndteringsstøy og
mekanisk overført vibrasjonsstøy.
- Fremragende ytelse og robust konstruksjon, Ideell for kritiske studio- og live applikasjoner
- Høy SPL tålighet og stort dynamikkområde
- Flat, utvidet frekvensrespons
- Valgbart 80Hz høypassfilter og 10dB PAD
- Høyt front-bak dempingsforhold – nyre polardiagram fremhever ønsket og demper uønsket lydkilde
- Lav egenstøy passer perfekt sammen med digitalt opptaksutstyr
- Eksepsjonell reproduksjon av lavfrekvente lyder
- Lav-masse element for superb transientrespons
Ideal for critical studio and live applications, the low-profile AT4021 offers a flat, extended frequency response, high maximum SPL and wide dynamic range. Its low self-noise is perfectly suited for the most sophisticated recording equipment. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. The microphone offers outstanding reproduction of low-frequency sounds.
- Outstanding performance and rugged construction
- High SPL handling and wide dynamic range
- Flat, extended frequency response
- Switchable 80 Hz hi-pass filter and 10 dB pad
- High front-to-back rejection ratio - cardioid polar pattern improves isolation of desired sound source
- Low self noise perfectly suited for digital recording equipment
- Exceptional reproduction of low frequency sounds
- Low-mass element for superb transient response
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 12 dB/octave
- Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Impedance: 250 ohms
- Maximum Input Sound Level: 146 dB SPL, 1 kHz at 1% T.H.D.; 156 dB SPL, with 10 dB pad (nominal)
- Dynamic Range: 132 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 80 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 48V DC, 3.0 mA typical
- Weight: 119 g (4.2 oz)
- Dimensions: 144.0 mm (5.67") long, 21.0 mm (0.83") maximum body diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; protective carrying case
