Ingen varer i handlekurven.
Du er nå her:
Perfekt matchet par med de klassiske stormembran kondensatormikrofonene som gjenskaper lyden i den legendariske C 414 B-ULS.
Meget godt egnet til opptak av alle slags lydkilder, i studio og på scene.
3 valgbare basskutt, 3 valgbare padnivåer og 9 karakteristikker gjør dette til en referansemikrofon
Leveres i koffert som inkluderer H-85 elastisk oppheng, stereojern, PF-80 POP filter og W-414X vindhette.
- Absolutely perfectly matched stereo pair thanks to AKG's sophisticated computer-aided matching method
- Highest possible correlation over the whole frequency range and virtually identical sensitivity
- Selected from thousands of individual microphones
- Designed, Engineered and Built in Vienna, Austria
Realistic stereo recordings require microphones with outstanding performance and excellent quality. They also require performance consistency and accurate localisation from the pair of microphones. Therefore, every factory-matched pair has been created from thousands of individual microphones selected by AKG's sophisticated computer-aided matching method. The result is the highest possible correlation over the whole frequency range and virtually identical sensitivity for stunning, three-dimensional recordings.
The matched pairs consist of two microphones that are within 1 dB to each other in sensitivity and also within 1 dB to each other in the range of 300 Hz to 8,000 Hz of the individual frequency response when used in cardioid mode. The microphones are selected from a large quantity of individual microphones according to the described criteria by using a proprietary computer program.
Using this matched pair for stereo recordings in various techniques will provide a good and stable balance without frequency-dependent shifting of the stereo panorama.
The kit includes all the standard accessories of the deluxe package (excluding the PF 80) along with a stereo bar and proof of performance charts in an attractive carrying case (large Soundtool case).
| Polar pattern | omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight and 4 intermediate settings |
| Frequency range | 20 to 20, 000 Hz |
| Sensitivity | 20 mV/Pa (-34 dBV) ± 0.5 dB |
| Max. SPL | 200/400/800/1600 Pa = 140/146/152/158 dB (0/-6/-12/-18 dB) for 0.5% THD |
| Equivalent noise level | 6 dB-A (0 dB preattenuation) (IEC 60268-4) |
| Signal/noise ratio | 88 dB |
| Preattenuation pad | 0 dB, -6 dB, -12 dB, -18 dB, switchable |
| Bass cut filter slope | 12 dB/octave at 40 Hz and 80 Hz; 6 dB/octave at 160 Hz |
| Impedance | <=200 ohms |
| Recommended load impedance | >= 2,200 ohms |
| Supply voltage | 48 V phantom power to DIN/IEC |
| Powering | approximately 4 mA |
| Connector | 3-pin XLR to IEC |
| Dimensions | 50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.) |
| Net weight | 300 g (10.6 oz.) |
| Patent(s) | Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488) |
