Ingen varer i handlekurven.
Du er nå her:
Båndmikrofon med innebygget høy-pass filter.
Ekstremt gode feedback-egenskaper.
Dette er en robust modell som godt kan benyttes i live sammenheng.
Application
- Vocals
- Instrumental miking
- Speech
The M 260 is used for vocals and miking instruments at broadcast, recording and film studios. Its flat frequency response and natural, warm ribbon sonic profile make it a highly effective element of the digital recording process.
The hypercardioid polar pattern provides an extremely high gain-before-feedback and elimination of lateral noise. The M 260 is equipped with a built-in high-pass-filter which compensates the close miking effect, when the microphone is applied very close to an instrument. The microphone also features a high insensitivity towards magnetic stray fields and extreme temperatures. The rugged grille protects the microphone system against accidental hits and kicks.
Features
- Ribbon transducer performance in a rugged, versatile configuration
- Hypercardioid polar pattern
- Extremely high gain before feedback
- Fast, transient response
- Wide, flat frequency response
- Rugged metal casing
| Transducer type | Dynamic |
| Operating principle | Pressure gradient |
| Frequency response (distant miking) | 40 - 18,000 Hz |
| Polar pattern | Hypercardioid |
| Open circuit voltage at 1 kHz (0dB = 1V/Pa) | 0.9 mV/Pa ≡ -60.5 dBV |
| Nominal impedance | 200 Ω |
| Load impedance | ≥ 1000 Ω |
| Diaphragm | Pure aluminium |
| Case/finish | Brass |
| Connector | 3-pin XLR male |
| Length | 163 mm |
| Shaft diameter | 24 mm |
| Head diameter | 43,5 mm |
| Weight without cable | approx. 230 g |
