Ingen varer i handlekurven.
Du er nå her:
Røde VideoMic er en mikrofon beregnet for både profesjonelle og amatører som tilleggsutstyr til små, håndholdte videokamera.
VideoMic er en retningsbestemt mikrofon av shotgun type som plukker opp lyden du peker mikrofonen mot. Lyd fra andre omgivelser vil da være dempet.
Mikrofonen plasseres i "Blitz-skoen" som finnes på så og si alle vanlige hjemmekamera. Tilkobling skjer ved hjelp av en 3,5 mm stereojack (mono, balansert signal). Internt batteri sørger for en driftstid på minimum 100 timer.
Mikrofonen har et isolerende oppheng i tillegg til et høypassfilter som gjør at bass-romling og kamerastøy reduseres til et minimum. Vindhette følger også med.
The RØDE VideoMic is a professional grade shotgun microphone. Based on the latest ‘Film industry’ technology, the VideoMic is designed specifically for use with high quality Digital Video Cameras.
The microphone exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight, yet rugged due to it’s ABS construction. The VideoMic is powered by a standard 9 V battery and offers a Low Battery LED status indicator and a switchable high pass filter to reduce unwanted low frequency rumble.
The VideoMic attaches to any Camcorder that has the standard camera-shoe fitting and utilizes a stereo mini jack for audio output.
You can also use the SVM as a remote mic on a stand, or a RØDE boom pole (Optional Accessory), which truly makes this versatile product well suited for all video applications including Electronic News Gathering (ENG), Weddings, Sports Events & Interviews.
Features:
- Studio recording quality
- Rugged fibre-reinforced ABS construction
- 9 V battery operation
- Custom designed integral wind shield
- Condenser Microphone
- Low noise circuitry
- Low handling noise
- Integral camera-shoe mount
- Designed & manufactured in Australia
- Full 10 year guarantee*
| Power | 9V battery powered |
| Acoustic Principle | Line gradient |
| Directional Pattern | Super Cardioid |
| Frequency range | 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave |
| Output impedance | 200Ω |
| Signal noise ratio | 74 dB SPL (A - weighted per IEC651) |
| Equivalent noise | 20 dB SPL (A - weighted per IEC651) |
| Maximum SPL | 134dB SPL (@ 1kHz, 1% THD into 1KΩ load) |
| Maximum output voltage | |
| Sensitivity | -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 176gm |
| Dimensions | 65mmH x 250mmW x 102mmD |


