Ingen varer i handlekurven.
Du er nå her:
Adam A8X er den største monitoren i den nye A-X serien. Dette er en skikkelig kraftig plugg, og den ligger vel strengt tatt helt oppunder midfield-segmentet, grunnet sitt kraftige lydtrykk og store klang. Som de andre monitorene i denne serien har også A8X en ny og effektiv forsterker, som gir opp til 120 dB (peak) lydtrykk, over et enormt frekvensområde på 38Hz til 50kHz.
Hvert element har sin egen dedikerte forsterker. En 50W A/B-forsterker er ansvarlig for diskantelementet, mens midwooferen drives av en 150W PWM-forsterker. Legg så til at den nye og effektive X-ART bånddiskanten spiller uforvrengt opp til 50kHz, og at du har avansert elektronikk som kan tilpasse høyttaleren til ethvert studiomiljø, samt at prisen er nærmest latterlig lav i forhold til ytelse og kvalitet... ja, her er det bare å børste støvet av det gamle sjekkheftet ditt!
The most powerful AX monitor
With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.
The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.
Cabinet- and bass reflex-construction
Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.
Amplification and controls
With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.
On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.
| Mid-Woofer | |
| Number | 1 |
| Basket | 8.5" (220 mm) |
| Voice coil | 1.5" (38 mm) |
| Cone material | Carbon / rohacell / glass |
| Tweeter | |
| Number | 1 |
| Type | Xart |
| Diaphragm area | 4 inch² (2420 mm²) |
| Equiv. Diaphragm Ø | 2" (56 mm) |
| Velocity transform ratio | 4:1 |
| Diaphragm weight | 0.17 g |
| Built-in Amplifiers | |
| Mid-Woofer | 1 |
| Type | PWM |
| Amp. power RMS / music | 150 W / 225 W |
| Tweeter | 1 |
| Type | A/B |
| Amp. power RMS / music | 50 W / 75 W |
| Control panel | |
| Input Sensitivity | -∞ to +14 dB |
| Low shelve > 5 kHz | ±6 dB |
| High shelve < 300 Hz | ±6 dB |
| Tweeter gain | ±4 dB |
| Input connectors | |
| Analog | XLR / RCA |
| General data | |
| Frequency response | 38 Hz - 50 kHz |
| THD 90dB/1m > 100 Hz | ≤0.5 % |
| Long term output | ≥112 dB |
| Max. peak | ≥120 dB |
| Crossover frequencies | 2300 Hz |
| Input impedance | 30 KOhm |
| Weight | 13 kg |
| Magnetically shielded | No |
| Height x Width x Depth | 400 mm x (255 mm x 320 mm |
| Warranty | 5 Years |
