Ingen varer i handlekurven.
Du er nå her:
ADAM's nye og forbedrede Sub10 mk2 har fått et redesignet kabinett med en ny løsning bass-refleks pipe, som grunnet sin konstruksjon og størrelse, begrenser "pustingen" fra porten og isteden gir økt effekt. Sub10 MK2 har en 10 tommers papirkone, som får sin forsterkning via en 200 watts ICE kraftforsterker. Dette gir Adam Sub 10 mk2 hele 115dB SPL. Frekvensresponsen (± 3dB) er fra 25H til 150Hz, og har alle nødvendige innstillingsalternativer på baksiden, inkludert fasevender, 85Hz filter for satelitthøyttalerne, inngangsnivå (-40dB to +6dB), og variabel lo-pass til subben (50Hz to 150Hz).
Adam Sub10 mk2 passer til en rekke av Adam's studiomonitorer, og vil også fungere fint med andre aktive studiomonitorer
Sub10 can used with many different satellites. Variable fourth-order Linkwitz-Riley filters are used to make the crossovers as musical as possible. The phase of the incoming signal can be varied between 0° and 180° to allow for maximum flexibility in woofer placement. If you need even more low-frequency power, you can use the sub output to connect as many Sub10 MK2s together as you need.
Balanced and Unbalanced Connections
The Sub10 MK2 is easy to integrate into your system. Connect via your choice of RCA or balanced XLR connectors. In order to adapt the Sub10 to different satellite loudspeakers, you can limit the high frequency output of the subwoofer with the variable low pass filter. Plus, you can independently roll off the low frequency output of the satellites using a variable high pass filter.
ADAM Sub10 Subwoofer Features:
- 2-way active bass reflex speaker
- Woofer - 10.7 " coated paper
- Frequency. response (± 3 dB) - 25 Hz - 150 Hz, variable.
- Panel (rear-mounted) - Gain, filter adjustment
- Power - 200 W (sin), 400 W (RMS)
- Inputs - Balanced XLR and Unbalanced RCA
- W x H x D - 11.8" x 19.7" x 15.7"
| Subwoofer | |
| Number | 1 |
| Basket | 10" (260 mm) |
| Voice coil | 2" (50 mm) |
| Cone material | Paper |
| Built-in Amplifiers | |
| Subwoofer | 1 |
| Amp. power RMS / music | 200 W / 300 W |
| Input connectors | |
| Analog | XLR / RCA |
| General data | |
| Panel | Rear |
| Frequency response | 25 Hz - 150 Hz |
| THD > 60 Hz | ≤1 % |
| Max. peak | ≥113 dB |
| Crossover frequencies | 50 - 150 Hz |
| Input impedance | 10 KOhm |
| Weight | 46.3 lb (21 kg) |
| Height x Width x Depth | 22" (560 mm) x 12" (300 mm) x 15.5" (400 mm) |
| Warranty | 5 Years |
