Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Earthworks M30

Supernøyaktig målemikrofon, 5-30kHz frekvensområde

Earthworks M30
Varenr.: 102759
Lagerstatus: Best. vare
kr 7 995 inkl. mva. kr 6 396 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Earthworks M30 er den mest populære målemikrofonen fra Earthworks. Akustikere og produsenter av lydutstyr over hele verden stoler på denne til sitt daglige virke.

  • Kostnadseffektiv målemikrofon
  • Ideell til akustiske målinger, inkludert høyttalerdesign, kvalitetskontroll, kalibrering av høyttalerflater og rom-målinger. Kort sagt, på alle felt hvor en nøyaktig lydmåling er påkrevet.
  • Kule karakteristikk (omni)
  • Flat frekvensresponse, rask impulsrespons og eksepsjonelle polar-karakteristika
  • Anbefalt brukt med SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA, samt akustiske målesystemer fra dbx, DEQX og andre
  • Møter eller overgår ANSI Type 1 og IEC 61094 standarden
  • Krever 48V fantomspenning
  • Hver M Series mikrofon leveres med sitt individuelle kaibreringsark.

The M Series has become the accepted standard for affordable, reliable reference and measurement microphones that are accurate in the time domain and frequency response. They are remarkably stable with respect to temperature and atmospheric conditions and are optimized for clean, very fast impulse performance providing accurate wideband response with virtually no handling noise.

  • 30kHz flat frequency response
  • Ideally suited for acoustical measurements including loudspeaker design and quality control, sound system setup and troubleshooting, room acoustics, or any application where an accurate free-field measurement microphone is required
  • Improved version of the SMAARTMIC™ previously offered by EAW
  • Omnidirectional polar pattern
  • Flat frequency response, fast impulse response and exceptional polar characteristics
  • Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
  • Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  • Requires 48V Phantom Power
  • Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
  • Electronic Calibration File available
  • Operating Temp Range: -10 deg C to +40 deg C ( 14 deg. F to 104 deg. F)
  • Storage Temp Range: -20 deg C to +50 deg C ( -4 deg. F to 122 deg. F)
  • Frequency Response: 5Hz to 30kHz ±1/-3dB
  • Polar Pattern: Omnidirectional
  • Sensitivity: 30mV/Pa (-30.5dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 142dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100Ω, balanced (50Ω ea. pin 2 & 3)
  • Min Output Load: 600Ω between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 229mm x 22mm (9 x .860 inches)
  • Weight: .5 lb. (225g)