Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:


Lydkort med 8 mic.amper og SoundGrid Extreme server

Varenr.: 113971
Lagerstatus: På lager

Før pris: kr 44 995

Nå pris: kr 34 995 inkl. mva. kr 27 996 eks. mva.

Legg varer i handlekurven
Flere Bilder Bookmark and Share
Tilbudet gjelder til 31.08 eller så lenge lageret rekker

DiGiGrid IOS-XL - High-Definition I/O med innebygget SoundGrid Extreme Server
DiGiGrid IOS-XL er et 8x8 interface med innebygget SoundGrid DSP-server og nettverk-switch. IOS gir deg 8 mikrofon-/ linjeinnganger av høy kvalitet, 8 linjeutganger med ekstra alternativ utgang, 2 hodetelefonforsterkere, MIDI, S/PDIF og AES/EBU. Sammen med Logic, Pro Tools, Nuendo, Cubase o.l. får du en svært fleksibel ruting, et komplett studio i/o og plugin-integrering, alt via en enkel nettverkskabel. Trenger du flere i/o? Da kobler du bare til nok en DiGiGrid-enhet via nettverksportene på IOS-XL. Det beste av alt er at du kan spille inn, mikse og lytte i realtid samtidig som du benytter SoundGrid-kompatible plug-ins fra Waves, Flux::, Sonnox og Plugin Alliance med kun 0.8ms latency.


  • SoundGrid interface
  • Integrert SoundGrid Server Extreme i7v3
  • DSP for miksere med Waves-kort som Allen&Heath, DiGiCo, Avid, Yamaha, Cadac, Midas, Behringer, osv.
  • DSP for Waves LV1. MultiRack og StudioRack
  • 8 mikrofon-/ linjeinnganger
  • 8 linjeutganger
  • MIDI-interface (sendes på nettverket)
  • S/PDIF
  • 2 individuelle hodetelefonforsterkere
  • Digico høykvalitets mikrofonforsterkere*
  • Full plugin-integrering med SoundGrid Server innebygget
  • Null-latency lytting for talentene inkludert plug-ins i lyttekjeden
  • Frontpanel "quick-view" meter
  • 24bit/192kHz (SounGrid støtter opp til 96kHz pr. i dag)
  • Superlav latency: 0.8 ms
  • Tilkobling via nettverk
  • Kraft til å kjøre flere hundretalls plug-ins
  • SoundGrid, ASIO og Core Audio
  • Waves eMotion ST / Waves Studio Rack programvare


*Behind DiGiGrid’s Top-Grade Microphone Preamplifiers:
The Challenge:
A microphone preamplifier is not just about amplifying small signals. If that were the case, designing preamps would be easy! Preamps have to perform in the harshest environments. A microphone signal often starts off at very low levels—sometimes a millivolt or so. It then has to travel down very long cables, possibly through patch bays, before arriving at the amplifier input. Along the way it is subjected to many problems. One of them is electromagnetic interference: a long mic cable makes a perfect antenna for picking up radio interference, and stages today are full of such devices, from radio mics and walkie-talkies to wireless Ethernet, to mention just a few examples. Other factors, such as static, can also cause interference. The preamp also has to withstand abuse such as shorting phantom power to ground. This can result in large -48V transients being applied to the delicate front end.

So, a good microphone preamp has two tasks:
1. It has to faithfully amplify and reproduce the small signals from the microphone
2. It has to prevent the pickup of any erroneous noise or abuse.

The Design
Designing a very low-noise preamplifier that can work in harsh conditions is not a simple task. This is why DiGiGrid audio interfaces feature top-of-the-line mic preamps by DiGiCo, who after more than 30 years of mic preamp evolution have arrived at their best design yet.

Let’s start at the front end:
• DiGiCo preamps have state-of-the-art transient suppressors that can clamp spikes within 5 ns and absorb up to 600-watt peaks.
• Following this, a LC Delta/PI network prevents any RF from getting through.
• Finally, there are two clamp diode arrays just in case anything made it through the first two barriers.

We then get to the mic preamp itself: Its input stage provides an impedance to the microphone which is constant over the audio spectrum. This is important for preventing the introduction of artifacts into the microphone signal. The front end of the preamp is based on the best available bipolar amplifiers today. They provide a very consistent ultra-low-noise input, so each amplifier sounds exactly the same. These inputs are also capable of handling very high-signal levels (at low gains) of over 26 dB without clipping.

The preamp gain is 100% digitally controlled, providing a smooth padless gain range from -20 dB to +60 dB. The gain steps are carefully controlled and utilize zero voltage crossing detection to ensure that any gain change is done silently. On top of this, the preamp is instructed to mute when phantom power is applied in order to prevent loud transients. By applying digital control to the front end gain, we can ensure that the dynamic range and the signal-to-noise ratio are always optimized.

A microphone preamplifier in a digital mixer can only be as good as the A-to-D converter. Having a low-noise front end can often be compromised by the selection of the converter. At DiGiCo there is no compromise. After looking around for the market leader in performance and ignoring the price, DiGiCo found the ideal partner in Burr Brown. Their multibit delta sigma converter provides over 123 dB of input dynamic range, ensuring that the converter would never compromise the performance of the preamplifier. - Technical Director – DiGiCo

The Result
So there we have it: an ultra-robust front end mic preamp that can faithfully amplify and reproduce delicate microphone signals, even in the harshest environment 

An 8 x 8 audio interface with a built-in SoundGrid DSP server and network switch, the DiGiGrid IOS-XL features 8 mic/line inputs with broadcast-grade preamps, 8 line outputs, 2 headphone outputs, MIDI I/O, and S/PDIF as well as AES outputs. Perfect for professional and personal production studios alike, IOS-XL truly is THE all-in-one, comprehensive solution for Native DAW users.

With full plugin integration inside your Native DAW of choice (Logic, Cubase, Nuendo, you name it), all you need is a single Ethernet cable: Plug the IOS into your computer and you’re good to go. Need more I/Os? Connecting additional DiGiGrid components to your system is a breeze: A single Cat 5e/Cat 6 Ethernet cable is all you need to tap into the power of SoundGrid networking and processing. Best of all, you can track, mix and monitor in real time, using hundreds of your favorite SoundGrid-compatible Waves and third-party plugins, with latency of only 0.8 milliseconds.


  • SoundGrid audio interface with built-in DSP server
  • 8 mic/line inputs, 8 line outputs
  • 2 independent headphone outputs
  • Built-in Extreme i7 SoundGrid DSP server
  • Software-controlled award-winning preamps
  • ASIO/Core Audio-compatible
  • MIDI, S/PDIF, and AES/EBU inputs and outputs
  • Connects via a single Ethernet cable
  • Quick-view front panel metering and status indicators
  • High-definition ADC/DAC conversion
  • Compatible with SuperRack, MultiRack, eMotion LV1, SoundGrid Studio

DiGiGrid IOS Comes with the Complete SoundGrid Studio System Software by Waves
The SoundGrid Studio System is the next generation of sound technology. It is a real-time processing and networking platform designed to bring your studio up to light speed. It allows your DAW to offload its plugin processing to a SoundGrid DSP server and enables your devices to communicate with one another and with the devices of the people you work with. The SoundGrid Studio System integrates seamlessly with all DAWs and DiGiGrid (or other SoundGrid-compatible) I/Os, providing endless possibilities for setups of every size—from a single DAW with one DiGiGrid I/O, to an entire network of host computers, I/Os, and SoundGrid DSP servers.
eMotion ST is the mixer part of the SoundGrid application. It integrates with StudioRack and lets you run SoundGrid plugins for low-latency monitoring, providing you with complex monitor mixing options.

 The SoundGrid Studio System Gives You the Power to Do More

  • Real-Time Processing – Run hundreds of plugins simultaneously.
  • Low-Latency Monitoring – Track and rehearse with full-on plugins in near-zero latency.
  • Networking – Connect everything and everyone through a centralized hub.
  • Seamless Integration – Connect multiple DAWs using the SoundGrid ASIO/Core Audio driver.
  • Open Architecture – Compliant with SoundGrid-compatible Waves and third-party plugins.

SoundGrid Studio System Software Components

  • SoundGrid Studio Application – For managing the SoundGrid network on your host computer.
  • eMotion ST Mixer – Low-latency monitoring for tracking and rehearsing.
  • StudioRack – For running plugin chains, saving and loading their presets, and offloading their processing to a SoundGrid DSP server.
  • SoundGrid ASIO/Core Audio – Connects any DAW to the SoundGrid network as a software I/O.

SoundGrid Studio Application
The SoundGrid Studio Application is your tool for managing all software and hardware connected to the SoundGrid network. With its dynamic I/O mapping ability, the SoundGrid Studio Application lets you configure your SoundGrid network, manage its various components, and set up any combination of drivers and SoundGrid-compatible devices. It also enables I/O sharing between several computers, allowing you to manage their resources from your host computer.

The SoundGrid Studio Application enables you to:

  • Configure your SoundGrid ASIO/Core Audio driver and DiGiGrid I/Os. (Auto-configuration Wizard available.)
  • Process, mix and monitor in real time (together with StudioRack and the eMotion ST mixer).
  • Connect and patch multiple hardware devices and software I/Os.
  • Stream audio from and to multiple host computers running different DAWs.
  • Create and save your own configuration templates.
  • Control the parameters of your DiGiGrid I/Os (channel input gain, phantom power, etc.).

eMotion ST Mixer
eMotion ST is the mixer part of the SoundGrid Studio System. Combined with StudioRack, it lets you run SoundGrid plugins for low-latency monitoring, giving you complex monitor mixing options while recording with your DAW.

eMotion ST is a high-quality mixer with 8 multi-purpose inputs, 64 additional StudioRack input channels, 2 FX busses, 6 mix busses, and a main stereo mix. Since the mixer operates within the SoundGrid network, any DiGiGrid I/O or any available SoundGrid-compatible I/O device, whether hardware or driver-based, can provide it with inputs and outputs.

The eMotion ST mixer can run hundreds of Waves and third-party SoundGrid-compatible plugins in low latency, replacing in this respect the external mixer traditionally used to create monitor mixes for studios and headphones.


  • 8 multi-purpose mono/stereo input channels
  • 2 stereo FX aux buss/returns and 6 stereo aux buss/returns
  • Up to 64 mono channel feeds from StudioRack plugins
  • 8 insert slots per channel for SoundGrid plugins
  • Connects to multiple DiGiGrid I/Os and other SoundGrid-compatible devices and hosts
  • Compliant with SoundGrid-compatible Waves and third-party plugins
  • Fully integrates with StudioRack
  • Enables use of SoundGrid plugins as standalone processors for any purpose
  • Requires at least one DiGiGrid I/O and a SoundGrid DSP server

StudioRack is a software rack dedicated to running plugin chains. The processing of each chain can then be directed to your host computer’s CPU or to the SoundGrid DSP server in your IOS, as you choose. When you process your plugin chains on the SoundGrid server, StudioRack lets you monitor your tracks in extremely low latency via the eMotion ST mixer.


  • Compatible with most popular DAWs
  • Plugin chains are processed on local CPU or SoundGrid DSP server
  • Compatible with Waves and third-party plugins
  • Enables  monitoring in super-low latency
  • Up to 8 plugins per rack
  • Fully automatable
  • Plugin chain presets can be loaded on any DAW as well as on MultiRack and eMotion ST
  • Instant access to plugin parameters within each chain
  • Intuitive MIDI control over all plugins
  • Avid Control Surface support

DiGiGrid IOS Control Panel

  • Clock settings: source, sample rate, type, status
  • Mic preamp controls: input gains, phantom on/off
  • Output levels
  • Sample rate conversion of digital inputs
  • Input and output meters
  • Save and load presets of unit settings
  • Save your settings along with your Waves and SoundGrid host application sessions

 DiGiGrid IOS-XL has a built-in SoundGrid DSP server that provides unequaled offload capabilities.
The table below indicates the number of plugins that can be inserted into StudioRacks and loaded to DiGiGrid IOS-XL before the system reaches DSP overload (85%) or fails to play audio fluently (clicks, dropouts, corruption).

The table below indicates the number of plugins that can be inserted into StudioRacks and loaded to DiGiGrid DGS-XL before the system reaches DSP overload (85%) or fails to play audio fluently (clicks, dropouts, corruption).

Plugin Component 44.1 kHz 96 kHz
API 2500 (mono) mono 512 366
API 550 (mono) mono 512 512
API 560 (mono) mono 114 100
AudioTrack (mono) mono 512 512
C6 Multiband Compressor (mono) mono 178 88
CLA-2A Compressor / Limiter (mono) mono 429 192
CLA-3A Compressor / Limiter (mono) mono 440 208
CLA-76 Compressor / Limiter (mono) mono 512 399
dbx® 160 Compressor / Limiter (mono) mono 82 86
DeEsser (mono) mono 512 512
Dorrough (stereo) (stereo) mono 256 256
H-Comp Hybrid Compressor (mono) mono 512 350
H-Delay Hybrid Delay (mono) mono 512 229
H-EQ Hybrid Equalizer (mono) mono 200 189
H-Reverb Hybrid Reverb (stereo)* mono 14 9
IR1 Convolution Reverb (stereo)* mono 65 19
IR-Live Convolution Reverb (stereo)* mono 90 37
InPhase (mono)** mono 512 512
J37 Tape (mono) mono 97 102
Kramer HLS Channel (mono) mono 145 72
Kramer Master Tape (mono) mono 128 44
L2 Ultramaximizer (mono) mono 512 369
LoAir (mono) mono 512 358
MaxxVolume (mono) mono 512 512
NLS Non-Linear Summer (mono) mono 415 181
PuigChild Compressor (mono) mono 477 208
PuigTec EQP1A (mono) mono 255 80
REDD 17 (mono) mono 177 248
Renaissance Bass (mono) mono 512 290
Renaissance Channel (mono) mono 512 350
Renaissance Compressor (mono) mono 512 512
Renaissance Equalizer (REQ6) (mono) mono 512 512
Renaissance Reverb (stereo) mono 191 96
Renaissance Vox (mono) mono 512 512
Scheps 73 (mono) mono 195 219
SSL E-Channel (mono) mono 512 421
SSL G-Channel (mono) mono 512 434
SSL G-Equalizer (mono) mono 512 512
SSL G-Master Buss Comp (mono) mono 512 450
TG 12345 (mono) mono 68 66
TransX Multi (mono) mono 512 277
TransX Wide (mono) mono 512 512
Vitamin Sonic Enhancer (mono) mono 194 98


The maximum number of plugins that can be tested given system limitations is 512 mono and 256 stereo (64 and 32 StudioRacks, respectively). Plugin benchmark results may vary slightly from one system setup to another.


While most plugins perform most efficiently at 44.1 kHz, a few perform as or even more efficiently at 96 kHz thanks to their upsampling or to non-sample-rate-dependent algorithms.



Alternativer til dette produktet:

DiGiGrid IOC

DiGiGrid IOC

Før pris: kr 21 995

Nå pris: kr 18 495 inkl. mva. kr 14 796 eks. mva.