Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Tascam Series 102i

24-bit/192 kHz USB-lydkort med 10 inn/4 ut og kraftig DSP

Tascam Series 102i
Varenr.: 114892
Lagerstatus: På lager
kr 3 299 inkl. mva. kr 2 639 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Tascam Series 102i er et helt nytt USB-lydkort fra Tascam.

  • Gir opp til 10 innganger og to balanserte utganger for Windows, Mac eller iOS-enheter
  • Lydkvalitet opp til 192 kHz / 24 bit
  • To analoge mikrofoninnganger med balanserte Neutrik XLR/Jack kombo-kontakter
  • Ultra-HDDA (High Definition Discrete Architecture) mikrofonforforsterker med svært lav egenstøy (EIN: –125 dBu)
  • Medfølgende software: iZotope Neutron Elements, IK Multimedia Amplitube & TRacks, samt Cubase LE

USB Audio/MIDI Interface With DSP Mixer (10 in, 4 out)
The compact SERIES 102i audio/MIDI interface is perfect for guitarists, songwriters and owners of small studios. It provides up to ten audio inputs and two audio outputs to a Mac or Windows computer or an iOS device, for recording and playback at up to 192 kHz / 24 bit and with the superb audio performance one expects from Tascam. Controllable with included custom software, this versatile USB interface is equipped with a powerful DSP input and output mixer with built-in digital reverb, compressor, phase invert and four-band EQ for each channel. Having this processor included internally eliminates all latency issues and takes the load off the computer allowing it to process the audio more efficiently. A new USB driver offers very high stability, ensuring reliable performance throughout all phases of your projects.

The two analogue mic/line/instrument combo inputs are fitted with Tascam’s transparent, natural-sounding, low-noise Ultra-HDDA mic preamps and individually switchable phantom power (+48 volt). A maximum of ten inputs (four at 192 kHz) are available when using the multi-channel optical port which can accept up to eight channels of audio input from an ADAT- or S/MUX-compatible device. The SERIES 102i also offers dual headphone outputs with dedicated level control and two balanced 6.3-mm line outputs for versatile monitoring. And you can connect your favorite MIDI devices to the rear-panel MIDI input and output to use them with your recording software.

The angled tabletop design gives easy access to all front-panel controls. You can quickly adjust the monitor output level with a large front-panel Monitor knob, and use the handy Monitor Balance control to mix live input with computer playback for zero-latency overdubs.

Start Your Projects Immediately With Bundled Software
While free, easy-to-use Tascam control software helps you manage faders, processing and routing of any audio input (analogue, optical and USB) to any audio output, the interface comes also with Steinberg Cubase LE DAW software for Windows and macOS and Cubasis LE app for iPad. With IK Multimedia AmpliTube guitar effects/modeling software and T-RackS mastering software you get the tools you need to deliver high-quality, polished recording projects. The IK Multimedia software is provided in both free standing and plug-in versions for complete, versatile recording, mixing, and mastering.

iZotope award-winning plug-in included
Neutron Elements provides an easy, fast way to a professional mix – and it is included with every purchase of a Tascam SERIES interface. Neutron brings mix workflows to the 21st century with four modern mixing tools in one mothership plug-in, featuring mix assistance powered by machine-learning with unrivaled quality and speed

Expandable Input Capability to Grow Into
Easily add more input channels to accommodate future growth by using external microphone preamplifiers with S/MUX optical inputs to record drums, guitars, keyboards, vocals, and more. Each S/MUX optical port can accept up to 8 channels of audio input from an ADAT- or S/MUX-compatible device.

Dual Headphones Monitoring
The SERIES interface has two individual headphones amplifiers powerful enough for dual headphones monitoring.

Built-in DSP Effects and Processing
A DSP input and output mixer is complemented with digital reverb, compressor, phase invert and four-band EQ for each channel. Having this processor included internally eliminates all latency issues and takes the load off the computer allowing it to process the audio more efficiently.

Mobility
Tascam SERIES interfaces support tablets and other mobile devices and are compatible with many applications to meet your recording needs now and in the future.

Features:

  • Provides up to ten audio inputs and two audio outputs to a Windows or Mac computer or iOS device
  • Audio resolution up to 192 kHz / 24 bit
  • USB Audio Compliance 2.0 for iOS connection


Hardware features

  • Two analogue mic/line inputs on XLR/TRS balanced combo connectors
  • High-grade Ultra-HDDA (High Definition Discrete Architecture) microphone pre-amps with ultra-low noise (EIN: –127 dBu)
  • High-quality audio input circuits for low-noise recording
  • Individually switchable 48-Volt phantom power on XLR inputs
  • Each TRS input can be switched to instrument-level for direct recording of guitar or bass
  • Gain controls, signal and peak indicators on each analogue input
  • Optical multi-channel audio input for expansion by a maximum of eight additional inputs
    • ideally suited for use with the Tascam SERIES 8p Dyna microphone preamplifier
    • S/MUX format with support for high sampling rates (ADAT-compatible)
    • 8 inputs at 44.1/48 kHz
    • 4 inputs at 88.2/96 kHz
    • 2 inputs at 176.4/192 kHz
  • Two monitor/line outputs (balanced TRS) with level control
  • Direct monitor option for low-latency monitoring
  • Monitor mix control for adjusting the level balance between signals from external devices and signals from the computer


Supported operating systems

Windows

  • Windows 10 (May 2019 Update)
  • Windows 8.1
  • Windows 7


Mac

  • macOS Mojave
  • macOS High Sierra (10.13)
  • macOS Sierra‎ (10.12)

iOS

  • iOS 12
  • iOS 11
  • iOS 10
General ratings
Sampling frequencies   44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth   16/24-bit
Analogue audio inputs
Mic inputs (when the input switch set to MIC/LINE)   XLR-3-31 (1: GND, 2: HOT, 3: COLD)
  Input impedance   1.5 kΩ
  Nominal input level   −64 dBu (0.0005 Vrms, GAIN knob at MAX)
−6 dBu (0.388 Vrms, GAIN knob at MIN)
  Maximum input level   +10 dBu (2.45 Vrms)
  Maximum gain   58 dB
Instrument inputs (when the input switch is set to INST)   6.3-mm standard TS jack 
(Tip: HOT, Sleeve: GND)
  Input impedance   ≥1 MΩ
  Nominal input level   −64 dBV (0.0006 Vrms, GAIN knob at MAX)
−6 dBV (0.501 Vrms, GAIN knob at MIN)
  Maximum input level   +10 dBV (3.162 Vrms)
  Maximum gain   58 dB
Line inputs (when the input switch set to MIC/LINE)   6.3-mm TRS jack 
(Tip: HOT, Ring: COLD, Sleeve: GND)
  Input impedance   10 kΩ
  Nominal input level   −54 dBu (0.0015 Vrms, GAIN knob at MAX)
+4 dBu (1.228 Vrms, GAIN knob at MIN)
  Maximum input level   +24 dBu (12.282 Vrms)
  Maximum gain   58 dB
Analogue audio outputs
Line outputs (balanced)   6.3-mm TRS jack 
(Tip: HOT, Ring: COLD, Sleeve: GND)
  Output impedance   230 Ω
  Nominal output level   +4 dBu (1.228 Vrms)
  Maximum output level   +20 dBu (7.75 Vrms)
Headphone outputs (PHONES)   Standard 6.3-mm stereo jack
  Maximum output power (THD+N ≤0,1 %, 32 Ω)   18 mW + 18 mW
Digital audio inputs/outputs
OPTICAL IN (S/MUX) connector(s)   Optical (JEITA RC-5720C)
  Signal format   Multi-channel optical format
(Supports S/MUX when 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz.)
Other inputs and outputs
USB   4-pin USB B-type
  Transfer rate   USB 2.0 Hi-speed (480 MBit/s)
MIDI input   5-pin DIN
  Format   Standard MIDI format
MIDI output   5-pin DIN
  Format   Standard MIDI
Audio performance
Mic amp EIN (equivalent input noise)   ≤−129 dBu
Frequency response (mic/line input to computer)    
  At 44.1/48 kHz   20 Hz – 20 kHz, +0/–0.4 dB (JEITA)
  At 88.2/96 kHz   20 Hz – 40 kHz, +0/–0.8 dB (JEITA)
  At 176.4/192 kHz   20 Hz – 80 kHz (JEITA)
S/N ratio   109 dB
(Mic input to Computer, Gain knob at minimum, 20-kHz low-pass filter, A-weighted)
110 dB
(Computer to Line output, MONITOR knob at maximum, 20-kHz low-pass filter, A-weighted)
Distortion (THD + N)   0,0016 %
(Mic input to Computer, 1 kHz sine wave, Gain knob at minimum, 20-kHz low-pass filter)
0,0023 %
(Line input to Computer, 1 kHz sine wave, Gain knob at minimum, 20-kHz low-pass filter)
0,0014 %
(Computer to Line output, 1 kHz sine wave, MONITOR knob at maximum, 20-kHz low-pass filter)
Crosstalk   ≥100 dB
(MIC/LINE input to LINE output 1-2, 1 kHz sine wave, gain knob at minimum)
Computer system requirements
Windows    
  Computer hardware requirements   Windows computer with a USB port that supports at least USB 2.0 or USB 3.0
  CPU/processor speed   2 GHz or faster dual core processor (x86)
  Memory   2 GB or more
Mac    
  Computer hardware requirements   Mac with a USB port that supports at least USB 2.0 or USB 3.0
  CPU/processor speed   2 GHz or faster dual core processor
  Memory   2 GB or more
iOS device   Apple iOS device running iOS 10 or later
Supported audio drivers   Windows: USB Audio Class 2.0, ASIO 2.2, WDM (MME), MIDI
Mac: Core Audio, Core MIDI
iOS device: Core Audio for iPhone
Power supply and other specifications
Power   DC 12 V AC adapter (PS-P1220E)
Power consumption   7.2 W
Dimensions (W × H × D)   186 mm × 65 mm × 160 mm
Weight   1.1 kg
Permissible operating temperature range   5–35 °C

Design and specifications subject to change without notice.