Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Earthworks SR30

kondensator, kardioid, 30Hz-30kHz

Earthworks SR30
Varenr.: 102930
Lagerstatus: Best. vare
kr 10 295 inkl. mva. kr 8 236 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Earthworks SR30 er en kondensator kardioide-mikrofon, som kan håndtere kraftige lydkilder inntil 145dB (SPL) lydtrykk. Den har en utvidet frekvensrespons fra 30Hz-30kHz. Finnes også som matchet par, SR30mp. Dette er en fantastisk flerbruksmikrofon, noen eksempler på bruksområder er:

  • Akustisk gitar
  • Bassforsterker
  • Blåseinstrumenter
  • Kor
  • Overhead på trommer
  • Hi-hat
  • Gitarforsterker
  • Basstromme
  • Orkester
  • Perkusjon
  • Piano
  • Strykere
  • Vokal
  • Treblås
     

Som alltid med Earthworks mikrofoner, får du en uanstrengt, puristisk nøyaktig og åpen lydkarakter - hvor instrumentenes egenart virkelig høres.

Earthworks cardioid microphones have patented near-perfect cardioid patterns. The sound across the entire front hemisphere is remarkably uniform and is flatter at 90 degrees than most microphones are on-axis. The SR Series have an incredible transparent sound quality, offering near-perfect polar response and high rejection of sounds at the rear of the microphone, resulting in less leakage and more gain before feedback.
 

  • Extended frequency response to 30kHz
  • Multi-purpose cardioid microphone
  • More gain before feedback than other microphones
  • Less leakage
  • Textbook perfect cardioid polar pattern with natural on- and off-axis performance
  • Provides excellent results for both live performance and recording applications
  • Extreme accuracy in the time domain for faithful reproduction and no smearing or distortion
  • Transparent sound quality
  • Shorter diaphragm settling time to prevent quieter attacks from being blurred by earlier louder attacks

 

  • Frequency Response: 30Hz – 30kHz ±2dB at 6 inches (15cm)
  • Polar Pattern: Cardioid or Hypercardioid
  • Sensitivity: 10mV/Pa (-40dBV/Pa)
  • Power Requirements: 48V Phantom, 10mA
  • Max Acoustic Input: 145dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 100Ω, balanced (50Ω ea. pin 2 & 3)
  • Min Output Load: 600Ω between pins 2 & 3
  • Noise: 22dB SPL equivalent (A weighted)
  • Dimensions L x D: 212mm x x 22mm (8.4 x .860 inches)
  • Weight: .5 lb (225g)