Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Shure Beta 52A

Dynamisk mikrofon for basstromme

Shure Beta 52A
Varenr.: 100559
Lagerstatus: På lager
kr 2 195 inkl. mva. kr 1 756 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Beta52 er en dynamisk spesialmikrofon for basstromme og øvrige bassinstrumenter. Det laveste frekvensområdet setter store krav til mikrofonens ytelse. Frekvensresponsen i Beta52 er spesielt tilpasset en punchy gjengivelse i bassområdet.

Beta52 er enkel å plassere foran basstromme og bassforsterker. Meget robust utførelse, dette gjelder også grillen. Meget effektiv innvendig shockmount. Superkardioide karakteristikk.

Premium Kick Drum Mic!
How low can you go? Pretty darn low if you're using the Beta 52A, a microphone specially designed for all kinds of bass, from drums to guitars. The Beta 52A will make your bass BOOM instead of getting lost in a swampy thud. The frequency response is 20 to 10,000 Hz, and the mic is built to withstand the daily abuse of road work.

The Shure Beta 52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch," and delivers studio quality sound even at extremely high sound pressure levels.

The Beta52A features a modified supercardioid pattern throughout its frequency range to insure high gain before feedback and excellent rejection of unwanted sound. A built–in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.


  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level (at 1,000 Hz) Open Circuit Voltage: -64 dBV/Pa* (0.6 mV)*1 Pa = 94 dB SPL
Impedance Rated impedance is 150 ohms (45 ohms actual) for connection to microphone inputs rated low Z
Phasing Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Maximum SPL 174 dB at 1000 Hz (calculated)
Connector Three-pin professional audio connector (male XLR type)
Case Silver blue enamel-painted die cast metal with hardened, matte-finished steel grille
Adjustable, Locking Stand Adapter Integral, dynamic locking, adjustable through 180 degrees, with standard 5/8"-27 thread
Net Weight 605 grams