Ingen varer i handlekurven.
Du er nå her:
MK300 FET er en strålende studiomikrofon i velkjent Miktek-kvalitet. Med tre valgbare karakteristikker, et stor frekvensområde, basskutt og dempeledd oppnår du svært gode opptak i alle situasjoner. Ingen andre mikrofoner i denne prisklassen kan skilte med lydkvalitet og funksjoner tilsvarende MK300. Dette er Mikteks første mirofon som er bygget utenfor Nashville, men med samme krav til kvalitet som USA-mikrofonene.
Nøkkelfunksjoner:
- 1-tommers kapsel, 5-micron gullbelagt film
- Nyre-, kule- og 8-tallskarakteristikk
- 100Hz basskutt
- -10dB demping
- 20Hz-20000Hz
- Maks. SPL: 127dB
- Miktek trafo
- Leveres med vinylpose og shockmount
3 Pattern FET Large Diaphragm Condenser
The Miktek MK300 Large Diaphragm FET condenser will impress the most critical listeners and inspire artists to create their best performance. The microphone features three switchable polar patterns including cardioid, bidirectional, and omnidirectional. In addition, the MK300 employs a high-pass filter at 100Hz and-10dB pad for recording loud sound sources. The frequency response boasts a full bottom end and a crystal clear top end, yet at the same time, the midrange is honest and open. The microphone produces amazing results when recording acoustic instruments, guitar amps, or as overheads on a drum kit. But of course, the MK300 really excels on vocal applications.
The MK300 utilizes a new custom Miktek capsule developed by Miktek engineers, featuring dual 1-inch diaphragms made using 5-micron Mylar with a 0.4- micron layer of evaporated gold. The diaphragm is precisely tensioned and mounted to a carefully tuned backplate to create the finished capsule. The MK300 features advanced circuitry in conjunction with a custom Miktek transformer and, together with the implementation of high-quality components including hand-selected transistors, offers a response reminiscent of highly sought after vintage microphones. The Miktek MK300 is designed to offer Miktek’s signature sound, now at an even greater value. The MK300 is packaged with a swivel mount, in a vinyl case along with the included shock-mount.
Features:
- Custom Miktek 1-inch Capsule 5-micron Mylar, Evaporated Gold Diaphragm
- Cardioid, Bidirectional, and Omnidirectional Pick-up Pattern
- 100Hz High-pass Filter & -10dB Pad Switches
- Custom Built Miktek Transformer
- Vinyl Pouch, Swivel-mount, and Shock-mount
Microphone Type | FET Condenser |
Polar Pattern | Cardioid, Bidirectional, Omnidirectional |
Diaphragm Size | 1" |
Frequency Response | 20Hz-20kHz |
Max SPL | 127dB |
Output Impedance | 150 ohms |
Signal to Noise Ratio | 81dB, 76dB, 72dB (varies by pattern) |
Self Noise | 16dB (A weighted) |
Low Cut Filter | 100Hz |
Pads | -10dB |
Color | Black |
Connector | XLR |
Weight | 700 grams |
Included Accessories | Vinyl Pouch, Swivel-mount, and Shock-mount |