Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Neumann KH 805 - Demo

10” aktiv subwoofer i utrolig bra kvalitet - ned til 18 Hz !

Neumann KH 805 - Demo
Varenr.: 109828
Lagerstatus: På lager

Før pris: kr 13 490

Nå pris: kr 11 495 inkl. mva. kr 9 196 eks. mva.

Legg varer i handlekurven
Flere Bilder Bookmark and Share
Tilbudet gjelder til 30.11 eller så lenge lageret rekker

Based on the excellent acoustical performance of the KH 810, the KH 805 is the optimal choice to be used in stereo applications, for example in combination with the KH 120 or KH 310.

The KH 805 has a unique 2.1/0.1 Bass manager which enables it to be used in many different applications. There are four routing modes to ensure maximum flexibility. Fourth order crossovers and adaptable acoustical controls allow for seamless system integration, and the bass management function can be remotely controlled.

The KH 805 subwoofer is designed to complement our extensive range of monitors, and can be used in music, broadcast, and post production studios for tracking, mixing, and mastering.

Uses:

  • Bass extension for loudspeakers down to 18 Hz
  • Increasing the maximum SPL of loudspeakers by up to 8 dB
  • Decreasing harmonic and intermodulation distortion of loudspeakers
  • Reproducing the LFE channel
  • Reproducing the “Sub” signal of a bass managed multichannel source
  • Making a Plane Wave Bass Array™ system
  • Working as an extension for KH 810, KH 870 and KH 805 subwoofer systems


NB! Kun stått i ustilling og ubrukt

Flexible electronics

  • 2.0/ 0.1 Bass Management for stereo and externally bass managed applications
  • Bypassable 4th order 80 Hz active crossover for maximum compatibility with consumer reproduction
  • Four routing modes on right input connector:
    • Right channel bass management
    • LFE to subwoofer only up to 120 Hz
    • Wide for multichannel systems where the bass management is in the source
    • Daisy chain for subwoofer arrays
  • Acoustical controls adapt the subwoofer’s response to the environment
    • Output level
    • Low cut
    • Parametric equalizer
    • 45° step phase control
  • Larger systems and Plane Wave Bass Arrays™ maybe constructed using the Daisy Chain output
  • Remoteable electronics (REK 3) for installation convenience, less cabling, and convenience of use
  • Integrated electronic limiter for amplifier and driver protection
  • Low heat dissipation amplifier


Robust driver and cabinet

  • Low frequency extension for main loudspeakers down to 18 Hz
  • Low distortion magnetically shielded long-throw driver
  • Reduced bass compression at high SPL from generously proportioned bass reflex ports
  • Allows main loudspeakers to play louder and with lower distortion
  • Wooden cabinet with a tough painted finish (anthracite) and high density rubber isolating feet
  • Excellent self-damping properties leading to minimal cabinet resonances
  • Cabinet look conforms to the family design 
Technical Data

 

Acoustics  
−3 dB free field frequency response 18 - 300 Hz, ± 3 dB
Pass band free field frequency response 19 - 300 Hz, ± 2 dB
Self-generated noise  level at 10 cm < 20 dB(A)
Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m > 40 Hz
Max. SPL In half space at 3% THD 110.7 dB SPL

Max. SPL with pink noise In half space at 1 m

112 dB SPL
Averaged between 40 and 90 Hz
Electronics  
Amplifier, cont. (peak) output power (THD < 0,1 %) 160 W (200 W)
Controller design Analog, active
Main channel crossover frequency 80 Hz
Crossover slope 24 dB/oct
Equalization: Low cut 30 Hz, 0 … −12 dB
Parametric Equalizer Bypassable
Parametric Equalizer - Gain +4 … −12 dB
Parametric Equalizer - Frequency 20 … 120 Hz
Parametric Equalizer - Q 1 … 8
Time of Flight adjustment delay 0 … 4.69 ms @ 80 Hz (4-step 0, 45, 90, 135), - 180° Switch
Bass Management Remote Control Bass management on/off
optional via a standard foot switch on a 6.3 mm jack
Protection circuitry Peak and Thermo Limiters
Infrasonic filter frequency; slope 6.5 Hz; 12 dB/oct.
Analog Inputs and Outputs  
Input/Output channels 2.0 or 0.1 / 2 + Daisy Chain
Impedance electrically balanced XLR, 13 kΩ
Input sensitivity 94, 100, 108, 114 dB SPL at 1m for a 0 dBu input level
Max. input level

+24

Signal routing modes Right, LFE 120 Hz, Wide, Daisychain
CMRR > 56 dB @ 15 kHz
Interchannel isolation (1 kHz), level matching −95 dB, ±0.1  dB
Dynamic range, THD+N - 119 dB(A), <0. 001% (-100 dB)
Gain Control +2 … −12 dB
Displays and indicators: power - on Green LED
- limit/clip Red LED “Flashing”
- bass management - active Green LED
Mains power -  220 - 240 / 100 - 120 V AC (switchable)
Power - consumption - Idle 14 W
Power - consumption - Full output  280 W
Mechanics  
Cabinet -  surface finish Painted
Color: standard

Metallic Anthracite (RAL 7021)

Baffle cover Included metal grille
Drivers Magnetically shielded
Woofer 265 mm (10")

Product dimensions
(height x width x depth), mm (inches)


360 x 330 x 645 mm
(14 1/8" x 13" x 25 3/8")
Net volume, internal / external 41.5 l /76.6 liters

Product weight

26 kg

Packed dimensions
(height x width x depth), mm (inches)


515 x 490 x 750 mm
Packed weight and cube 32.0 kg
Delivery includes 1x KH 805
3x Power - cables (Euro, UK, USA)
1x Operating manual
1x Supplement “Getting Started Quickly” 
Accessories

FO 810REK 3