Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Nova Pariz P9

2 x 8" 2-veis hornmatet line array høyttaler på 1000W RMS

Nova Pariz P9
Varenr.: 112721
Lagerstatus: På lager
kr 48 995 inkl. mva. kr 39 196 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Made for matching each other. The PARIZ system concept from NOVA
When developing the PARIZ system concept, our engineers and technology partners have created not only a new loudspeaker system. Hand in hand with world´s leading suppliers and international top specialists, they engineered an integrated sound reinforcement system, which is much more than just a combination of components. Every single part was selected and tuned to each other like perfectly interlocking gears. Whether in acoustics, mechanics, electronics or software: PARIZ was constructed as a whole system concept, which combines the ease of use via remote control interfaces and perfectly constructed rigging with maximum of performance and sonic clarity. It is designed for most flexible sound reinforcement applications, from basic setups for conferences up to world format live shows, even at most advanced acoustic challenges.

PARIZ is a neutral and professional platform, which enables sound engineers the total liberty for any acoustic mission possible.

The P9 line array module features a dipolar arrangement with two 8” neodymium transducers and a high precision 1.4” HF compression driver mounted onto a waveguide with 90° x 12° dispersion.

Both 8” transducers feature an extremely stiff UPM (Ultra Precision Membrane) carbon membrane design, which raises the particial oscillation to an inaccessible frequency range and reduces distortion to a minimum. The superior membrane damping is increased to a maximum, while natural oscillation is lowered to a smallest value. The UPM design further enables for increased speaker power capability of 500 W (RMS) for each single transducer. The P9 loudspeaker cabinet includes a passive 2-way crossover, which ensures for high efficiency in system cabling and amplifier configurations. The advanced bass-reflex ports eliminate side lobes, which usually occur with 2-way line array systems.

The groundbreaking ECD design (Extended Coverage Design) ensures for a very precise mid-range coverage. The V-arrangement of the two 8” transducers and the two additional outlets at the sides extend the horizontal dispersion of 90° at the typically critical frequency range between 700 Hz and 1.100 Hz. The vertical coverage of 12° allows for a basic system setup with four cabinets only. The acoustical and mechanical design enables vertical arrays of up to twentyfour P9 modules. The verticals splay angles are adjustable from 0° to 12° in steps of 1.5°. The cabinet is constructed from marine plywood and is covered with weather and impact protecting NPP (Nova Polyurea Protection) finish. The front of the loudspeaker is protected by a robust metal front grill with acoustically transparent foam. Each side includes one handle while two additional handles are included at the rear. The integrated three-point rigging hardware is recessed into the cabinet enclosure. The SLS (Splay Lock System) rigging technology makes splay adjustment to a walkover in two steps only, configuration and locking.

The P9 loudspeaker can be used for a wide range of applications, such as for stadiums, theatres, dance clubs, festivals, corporate events and churches.

  • Frequency Range (-10dB): 66Hz - 20KHz
  • Frequency Response (+/- 3dB): 75Hz - 18KHz
  • Coverage Pattern: 90° x 12°
  • HF Horn: Planar Wave Horn
  • Crossover Modes: Passive
  • Crossover Frequency: 1 KHz
  • Power Handling (AES / Peak 10 ms): 1.000 W / 4.000 W
  • Maximum Peak SPL:  136 dB
  • System Sensitivity (1W/1m): 100 dB
  • LF Drivers: 2 x custom made 8" Beyma Carbon Neodymium Speaker, 2.5" VC
  • HF Driver: 1 x custom made 1.4" B&C Neodymium Comp. Driver, 4" VC
  • Nom. System Impedance: 8 Ohms
  • Ext. Tuning: TX20 DSP (FIR)
  • Enclosure: 15/21 mm Birch Plywood
  • Rigging: SLS Rigging System with Splay angle 0°-12° (1.5° steps)
  • Transport: 4 integrated handles
  • Finish: Black NPP PolyUrea coating
  • Grille: Powder coated, black, perforated steel with acoustic transparent
  • Input Connectors: charcoal foam backing 2 x Neutrik Speakon NL4, 1+/1- , 2+/2- Loop
  • Dimensions (WxHxD): 590 mm x 253 mm x 370 mm
  • Weight: 21.5 kg