Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

LD Systems CURV 500 IAMP

4-kanals installasjonsforsterker med 4 x 240W med DSP

LD Systems CURV 500 IAMP
Varenr.: 112135
Lagerstatus: På lager

Før pris: kr 14 595

Nå pris: kr 9 995 inkl. mva. kr 7 996 eks. mva.

Legg varer i handlekurven
Flere Bilder Bookmark and Share
Tilbudet gjelder til 30.06 eller så lenge lageret rekker

4-Channel Class D Installation Amplifier
Purpose-designed for CURV 500 installations the iAMP is a low-profile 4-channel Class D rackmount amplifier with high-efficiency switch mode power supply and 10 Hz – 22 kHz frequency response. Sporting DSP control with presets for various satellite and subwoofer configurations, delay and parametric EQ each channel delivers 240 watts RMS at 4 ohms with less than 0.01% THD.

Operating the iAMP is simple and intuitive with just a single push encoder and easily readable high-contrast OLED display. It features a soft start circuit, DC, overcurrent, thermal and short circuit protection plus a temperature controlled low-noise fan. Input is on balanced XLR and terminal block connectors. The iAMP is capable of driving up to six CURV 500 satellites or one CURV500ISUB subwoofer per channel providing terminal block and speakON-compatible output connectors.

Features:

  • 4 channels with DSP control
  • Purpose-designed for CURV 500 installations
  • Low-profile 1U 19" rackmount construction
  • Drives up to six CURV 500 satellites or one CURV500ISUB subwoofer per channel
  • Single push encoder operation
  • High-contrast OLED display
  • Temperature controlled low-noise fan
  • High-efficiency switch mode power supply
  • Only 6.8 kg
Product number: LDCURV500IAMP
Product type: Power Amplifiers
Type: Installation Power Amplifiers
Rated ouput power (1kHz @ 2,7 Ohms): 4 x 240W
Rated ouput power (1kHz @ 4 Ohms): 4 x 240W
Rated ouput power (1kHz @ 8 Ohms): 4 x 120W
Rated ouput power (1kHz @ 16 Ohms): 4 x 60
Output circuitry: Class D
Frequency response: 10 - 22000Hz
THD: < 0,01 %
Protection circuits: thermal overload, DC, over-current, soft start, short circuit
Controls: Push encoder
Indicators: OLED Display
Line inputs: 4
Line input connectors: XLR, terminal block
Loudspeaker outputs: 4
Speaker output connections: Speakon compatible, terminal block
Cooling: temperature controlled low-noise fan, noiseless in idle mode
Operating voltage: Switching Power Supply, 115 V AC / 230 V AC (switchable)
Power consumption @ full load: 1100W
Width: 482mm
Height: 44mm
Depth: 420mm
Weight: 6.8kg