Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Radial Reamp JCR

Passiv Reamper for for studiobruk

Radial Reamp JCR
Varenr.: 103111
Lagerstatus: 2-3 dager
kr 2 629 inkl. mva. kr 2 103 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Reamp JCR er en passiv Reamper som lar deg ta et innspilt spor og sende det tilbake til en gitar eller bassforsterker, og gjøre opptaket på nytt. Fordelene er formidable, for istedenfor å bekymre seg over lyden på sporet, kan du konsentrere deg om det musikalske. Så når du har det i en boks, kan du sendte hjem gitaristen og Reampe sporet som du vil. Du kan flytte mikrofonene rundt i rommet, bytte forsterker, effekter.. i det hele tatt, saken blir mye mer kreativ.

Re-amping Made Easy!
What do you do to make your guitar track thicker? Re-amp! The Radial Reamp JCR is the latest incarnation of the fabled John Cuniberti Reamp products, and it is ready for all your re-amping needs. Why use just one amp on a track? Why not take the dry guitar signal and put it through another amp, or new effects, and re-amp it? With the Radial Reamp JCR it is easier than ever. The JCR takes care of your impedance, phase and connectivity issues, making re-amping quick and simple.

Get more out of your tracks with re-amping
With the Radial Reamp JCR you can take a pre-recorded guitar track, and send it through a second distortion pedal and amplifier and then slightly delay the track to add a thick doubling effect. You could also use the Reamp JCR from a voice track to a distortion pedal to ad some grit to a performance.

Input Control and Noise-free Output
The Radial Reamp JCR features include balanced line level input, a custom USA-made transformer that converts your signal impedance for use with guitar amps, three-position filter switch, 180-degree polarity reverse to bring your signal into phase, and ground lift options for noise-free operation.

Solid construction
As with all Radial products, the Reamp JCR is built like a tank to provide years of trouble-free performance. A welded I-beam internal skeleton provides a separate housing for maximum protection against external forces, which may cause stress on the PC board assembly while the outside bookend cover provides a protective zone for the switches, potentiometer and connectors. A full bottom no-slip pad performs double duty by keeping the Radial Reamp JCR from sliding around when placed on a vibrating amplifier while also providing electrical and mechanical isolation.

Radial Reamp JCR Passive Re-amping Device Features:

  • Custom transformer
  • Passive design
  • 14-Gauge steel welded I-beam construction
  • Ground lift switch - recessed to prevent accidental use
  • Phase inverter
  • Mute switch
  • Tone control
  • XLR and TS inputs
  • TS output

Reamp JCR Specifications
The Reamp JCR is the latest rendition of the original Reamp V.2 that was developed by John Cuniberti. Careful attention has been paid to ensure the sound and performance is faithful to the original. The heart of the beast is a custom made audio transformer that unbalances the signal and shifts the impedance. Key specifications are, of course, the frequency curve and phase response. For reference, we have also provided a comparison between the original Reamp and the new Radial JCR.


  • Frequency response: 20Hz to 20kHz (+/- 0.2dB)
  • Total harmonic distortion: 0.05% @ 20Hz, 0.006% @ 1kHz
  • Input: +4dB balanced line-level, 600-Ohms
  • Maximum input level: +21dBu @ 20Hz
  • Output: Instrument-level (variable), unbalanced, 5k Ohms
  • Power requirement: Passive (no power needed to operate)
  • Size: 89mm x 51mm x 140mm
  • Weight: 1 kg
  • Warranty: Transferable 3 year warranty