Tascam LM-8ST

16 kanals rackmikser for installasjon, studio submiksing og keyboardister
LD Systems ZONE 622

LD Systems ZONE 622

Tascam Model 24

Tascam Model 24

Vare nr.
114890
Pris inkl. mva kr 4 999,00
Lagerstatus: På lager

Flott linjemikser for stereokilder i en 19" rack-enhet. Med Tascam sin lange historie når det gjelder produksjon av miksere kan du være sikker på at dine lydmessige behov er behørig dekket. I tillegg til 8 stereo linjeinnganger, har den også en inngang på fronten til tilkobling av mikrofon. Kjekt å ha! Fin løsning til små behov, eller som sub-mikser for keyboardister e.l.

The LM-8ST is a compact line mixer for installation, studio submixing, keyboardists or anyone who needs a mix of line signal sources. Eight stereo input sources like CD/MP3 players, tuners, instruments etc. can be routed independently to a pair of stereo outputs. For the second output the user can choose between pre and post-fader routing. Input and output level controls and metering keep signals under control. A microphone input is also provided for announcements or performance. Master bus inputs and outputs are available for cascading multiple units.

The LM-8ST is housed in a rugged rack-mountable chassis and has a built-in power supply (no AC adapter) for many years of safe and reliable operation.

Main Features

  • Line mixer with flexible signal routing
  • Ideal solution for installations in boardrooms, conference rooms, health/fitness clubs, restaurants, houses of worship, as a keyboard or stage sub mixer and more
  • 8 stereo input channels for line sources like CD/MP3 players, tuners, TV or VCR audio signals etc. (balanced TRS)
  • Additional mic/line input with level control for channel 1 on front panel for announcements etc. (balanced XLR)
  • 2 stereo outputs (ST1 and ST2/AUX, balanced XLR / unbalanced RCA)
  • Each stereo input can be mixed to each stereo output independently:
    • ST1: Input signal is sent to ST1 output
    • ST2: Signal before the ST1 level control (pre fader) is sent to ST2/AUX output
    • AUX: Signal behind the ST1 level control (post fader) is sent to ST2/AUX output
    • Switches for ST2/AUX selection per channel on bottom panel
  • Input level selectable between +4 dBu and –10 dBV per channel (on rear panel)
  • Signal presence and overload LEDs on each channel
  • 4-dot LED stereo level meters on each output
  • Each stereo output switchable to mono
  • High-power headphones output with level control and selectable source (ST1, ST2/AUX)
  • Balanced master bus output and input (input selectable between ST1, ST2/AUX and Mix) for cascading of multiple units
  • Ground terminal and ground lift switch on rear panel
  • Easy replaceable fuse
  • 1U rack-mountable chassis
Audio inputs and outputs
Mic input   XLR (balanced)
  Input impedance   2.4 kΩ
  Nominal input level   –58 dBu (1 mV) to –12 dBu (195 mV)
  Maximum input level   +10 dBu (2.45 V)
Stereo inputs   6.3-mm TRS (balanced)
  Input impedance   56 kΩ
  Nominal input level   +4 dBu (1.23 V)
  Maximum input level   +24 dBu (12.3 V)
Master bus input   6.3-mm TRS (balanced)
  Input impedance   56 kΩ
  Nominal input level   +4 dBu (1.23 V)
  Maximum input level   +24 dBu (12.3 V)
ST1, ST2/AUX outputs   XLR (balanced)
  Output impedance   94 Ω
  Nominal output level   +4 dBu (1.23 V)
  Maximum output level   +24 dBu (12.3 V)
ST1, ST2/AUX outputs   RCA (unbalanced)
  Output impedance   200 Ω
  Nominal output level   –10 dBV (0.3V)
  Maximum output level   +10 dBV (3.16 V)
Bus output   6.3-mm TRS (balanced)
  Output impedance   94 Ω
  Nominal output level   +4 dBu (1.23 V)
  Maximum output level   +24 dBu (12.3 V)
Headphones output   6.3-mm TRS (stereo), 3.5-mm TRS (stereo)
  Maximum output power   250 mW + 250 mW (at 32 Ω)
Audio performance
Frequency response   20 Hz–50 kHz, ±3 dB (PHONES outputs)
10 Hz–100 kHz, ±3 dB (BUSS output)
S/N ratio   ≥80 dB(A) (PHONES outputs, 20 kHz LPF)
≥80 dB(A) (BUSS output, 20 kHz LPF)
THD   ≤0.07% (PHONES outputs, when outputting 100 mW + 100 mW (32 Ω), 20Hz HPF and 20 kHz LPF) 
≤0.03% (BUSS output, 20 Hz HPF and 20 kHz LPF)
Channel separation   ≥50 dB(A) (PHONES outputs, 20 kHz LPF, 1 kHz nominal input and output, 32 Ω termination)
≥70 dB(A) (BUSS outputs, 20 kHz LPF, 1 kHz nominal input and output, 600 Ω termination)
Crosstalk   ≥65 dB(A) (BUSS outputs, 20 kHz LPF, 1 kHz nominal input and output, 600 Ω termination)
Power supply and other specifications
Voltage requirements   AC 100–240V, 50–60 Hz
Power consumption   15 W
Dimensions (WHD)   482 mm x 44 mm x 280 mm
Weight   3.8 kg
Operating temperature range   5–35 °C
Included items   Power cord, Rack-mounting screw kit, Warranty card, Owner’s manual
Flere produkter fra Tascam