Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Tascam ML-16D

16 kanals 24-bit / 96 kHz AD/DA Analog / Dante konverter

Tascam ML-16D
Varenr.: 115010
Lagerstatus: Best. vare
kr 14 999 inkl. mva. kr 11 999 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

Profesjonelt lyd-interface med 16 balanserte analoge inn- og utganger, som overfører digitalt til Dante-protokollen og gir 16 inn- og utganger i inntil 96kHz via en enkel, standard nettverkskabel. Da trenger du bare en lisens (til ca 270 kroner) for et DVS (Dante Virtual Soundcard), så har du et supert og profesjonelt lydkort med superlav latency til opptak eller live-streaming.

16-channel Analog-to-Dante Converter
The TASCAM ML-16D feeds 16 channels of audio into or out of a Dante audio network at up to 24-bit/96kHz resolution. AES67 is also supported, so you can connect to Ravenna and other compatible networks. The ML-16D offers the utmost in reliability, thanks to dual redundant Ethernet jacks. This converter's reference level is user selectable, and an LED display provides at-a-glance confirmation of your signal levels. And with Audinate's Dante Controller software, you have the benefit of flexible routing via your Mac or PC. Any institution that wants to add a multitrack audio feed to their existing IP network will find the ML-16D invaluable.

Dante provides an easy way to deliver digital audio
The TASCAM ML-16D is a 16-channel analog-to-Dante converter. Dante (Digital Audio Network Through Ethernet) transmits uncompressed, multichannel digital audio over standard Ethernet with incredibly low latency. We've found that using Dante is incredibly convenient. Instead of dealing with a bunch of cumbersome analog cables, you use a single Cat 5e or Cat 6 cable. Rather than running analog cable throughout a studio or concert venue, you can utilize the structure's existing Ethernet network. The physical location of your devices is irrelevant. As long as your devices are connected to the same Ethernet network, you're good to go. Patching and routing between Dante-enabled devices are handled by Dante Controller software. Dante was originally developed in 2006 and has been adopted by over 150 pro-audio companies.

Features:

  • 16-channel analog-to-Dante converter with 16-in/16-out analog I/O on 4 D-sub connectors
  • AES67 is also supported for connecting to Ravenna and other compatible networks
  • Supports up to 24-bit/96kHz resolution for high-quality sound
  • Dual redundant Ethernet jacks offer the utmost in reliability
  • Selectable reference level metering
  • LED display provides at-a-glance confirmation of your signal levels
  • Audinate's Dante Controller provides flexible routing via your Mac or PC
  • Great for stadiums, theaters, concert venues, opera houses, houses of worship, universities, scoring stages, and more
Ratings
Audio resolution   44.1/48/88.2/96 kHz, 16/24 bit
Analogue audio inputs
Connectors   D-sub 25-pin
Locking screws   No. 4-40 UNC (inch type)
Nominal input level   +4 dBu, +6 dBu (only when maximum input level is +15 dBu)
Maximum input level   +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu 
(set by REF. LEVEL switches)
Input impedance   ≥10 kΩ
Analogue audio outputs
Connectors   D-sub 25-pin
Locking screws   No. 4-40 UNC (inch type)
Nominal output level   +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
Maximum output level   +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu 
(set by REF. LEVEL switches)
Output impedance   ≤200 Ω
Applicable load impedance   ≥2 kΩ
Network inputs/outputs
Dante PRIMARY/SECONDARY   RJ-45 connectors
  Transmission protocol   Dante
  Network standard   Gigabit Ethernet, 1000BASE-T (IEEE 802.3ab)
  Cable requirements   Cat 5e or better STP cables
Audio performance
ANALOG IN to DANTE OUT
  Frequency response   20 Hz – 20 kHz, +0.1 dB / –0.5 dB
(–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA)
20 Hz – 40 kHz, +0.1 dB / –0.5 dB
(–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
  Distortion (THD+N)   ≤0.001 % 
(–1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
  S/N ratio   ≥113 dB
(44.1/48/88.2/96 kHz sampling frequency, JEITA)
  Crosstalk   ≥115 dB
(1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
DANTE IN to ANALOG OUT
  Frequency response   20 Hz – 20 kHz, +0.1 dB / –0.5 dB
(–16 dBFS input, 44.1/48 kHz sampling frequency, JEITA)
20 Hz – 40 kHz, +0.1 dB / –1.0 dB
(–16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
  Distortion (THD+N)   ≤0.001 %
(–1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
  S/N ratio   ≥110 dB
(44.1/48/88.2/96 kHz sampling frequency, JEITA)
  Crosstalk   ≥115 dB
(1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Power supply and other specifications
Power supply   AC 100–240 V, 50/60 Hz
Power consumption   ML-32D: 22 W
ML-16D: 14 W
Dimensions (W × H × D)   483 mm × 45 mm × 304 mm
Weight   ML-32D: 3.5 kg
ML-16D: 3.3 kg
Operating temperature range   0–40 °C

Alternativer til dette produktet:

Tascam ML-32D

Tascam ML-32D
kr 21 999 inkl. mva. kr 17 599 eks. mva.