Procom music logo

G√• til hovedinnhold »

Søk i nettsted

Du er nå her:

Universal Audio 710

En kanals Mic Pre & D.I. med rør/Solid state

Universal Audio 710
Varenr.: 101146
Lagerstatus: Best. vare
kr 8 795 inkl. mva. kr 7 036 eks. mva.
Legg varer i handlekurven
Flere Bilder Bookmark and Share

710 Twin-Finity™ er et radikalt nytt UA preampdesign. Som kombinerer både det klassiske varme, retro UA-rørdesignet med det transparente solid-state-designet i en 2U, halv-rack chassis. 710 ble designet spesielt for å gi en sonisk fleksibilitet større enn de fleste andre preampene på markedet.

Nøkkelen til fleksibiliteten ligger i det innovative designet, som har en unik "transimpedance" input amp, som samtidig driver både en rørkrets og en solid state krets i korrekt fase med hverandre. Disse to kretsene er igjen summert ved utgangen. Miksen mellom den "single-ended class-A triode" rørkretsen, som drives ved 310 volt, og solid-state kretsen er kontrollert via et blend-pot merket "?". Blendingen er variabel mellom 100% rør og 100% solid-state, som gir nærmest uendelige mange muligheter av lydkarakterer, og muligheten til å tune in din egen "signatur lyd".

I likhet med alle UA preamper, har 710 to gainsteg kontroller (Gain/Level), som kan variere fargelegning og forvrenging ved å kunne la deg guffe på input gain som ved en gitaramp. VU metret har en unik funksjon, det kan settes i "Drive Mode", som gir deg muligheten til å se hvor hardt du kjører inputsteget på preampen.

Med sin store variasjon og fleksibilitet, vil 710 være den perfekte preamp-partneren til enhver mikrofonkolleksjon. I tillegg får du en JFET DI input krets, som enkelt håndterer ethvert instruments utgang. Gitarister og bassister vil sette stor pris på 710'ens mulighet til å bringe det beste ut av både passive og aktive mikrofoner.  Kommer med 19" rack-kit for å montere en eller to i rack.

Nøkkelfunksjoner:

  • Twin-Finity™ Tone-Blending Mic/Line Preamp & Hi-Z Instrument DI
  • Dual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp
  • Phase-Aligned "Tone-Blending" of Tube and Solid State
  • Dual Gain Stages: Wire with Gain to Creamy to Crunchy
  • Discrete JFET DI with 2.2M ohm Ultra Hi-Z impedance
  • Monolithic Balanced Output Stage

The 710 Twin-Finity™ is a radically new UA pre-amp design which uniquely combines both the classic retro warmth of UA tube design and the transient bite of solid-state in a 2U, half-rack, all-metal chassis. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps.

  • Twin-Finity™ Tone-Blending Mic/Line Preamp & Hi-Z Instrument DI
  • Dual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp
  • Phase-Aligned "Tone-Blending" of Tube and Solid State
  • Dual Gain Stages: Wire with Gain to Creamy to Crunchy
  • Discrete JFET DI with 2.2M ohm Ultra Hi-Z impedance
  • Monolithic Balanced Output Stage
     

The 710 Twin-Finity™ is a radically new UA pre-amp design which uniquely combines both the classic retro warmth of UA tube design and the transient bite of solid-state in a 2U, half-rack, all-metal chassis. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps.

The key to its sonic flexibility lies in its innovative circuit design, featuring a solid-state transimpedance input amp simultaneously driving separate, phase-aligned tube and solid-state gain stages, which are then summed to a single output.. The mix between the 310 volt single-ended class-A triode tube stage and solid-state transimpedance stage is controlled via the "Blend Knob" labeled "∞". Blending is continually variable between 100% tube and 100% solid-state offering a practically infinite range of unique pre-amp tones and the ability to easily dial-in your own signature sound.

Like all our other preamp designs, the 710 features dual gain-stage controls (Gain/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique "Drive" mode allowing you to see how hard you are driving the input stage.

Versatility makes the 710 the perfect preamp partner for any mic collection. Plus, the discrete JFET DI input circuit can also easily handle any electric instrument. Guitar and bass players will especially appreciate the 710s ability to bring out the best of both active and passive pickups. The 710 Twin-Finity includes a 19" rack-kit for mounting one or two units.

FEATURES
  • Twin-Finity™ Tone-Blending Mic/Line Preamp & Hi-Z Instrument DI
  • Dual-Path 310 volt Class-A Tube and Transimpedance Solid State Preamp
  • Phase-Aligned "Tone-Blending" of Tube and Solid State
  • Dual Gain Stages: Wire with Gain to Creamy to Crunchy
  • Discrete JFET DI with 2.2M ohm Ultra Hi-Z impedance
  • Monolithic Balanced Output Stage
  • 70dB+ of gain, +48V Phantom, Pad(-15dB), Phase Invert, and Low Cut Filter(75Hz)
  • Output and "Drive" backlit VU metering
  • Portable, Rack-Mountable design for Studio, Desktop or Stage
  • 19” Rack Kit Included, Optional Desktop Handle Kit also available
  • Front Panel Hi-Z Input (switched from Mic/Line automatically via Jack Detect)
  • Rear Panel XLR Mic Input, XLR Line Input and XLR Line Output
  • Universal Internal Power Supply
  • Heavy-Duty Metal Construction

 

General
Inputs   Microphone (Female XLR)
Balanced Line (Female XLR)
Unbalanced Instrument (1/4" jack) (D.I.)
Outputs   Balanced Line (Male XLR)
Type   Tube & Solid-State Phase-Aligned Tone-Blending Mic Pre & DI
Tube Complement   12ax7
Pad   -15dB
High Pass Filter   75Hz
Maximum Power Consumption   160mA @120VAC
20W
Power Requirements   100-240VAC
 
Dimensions   8.45W x 3.5H x 10.25D
Weight   5.25 lb
Impedance
Mic Input Impedance   2K ohms
Line Input Impedance   10K ohms
Hi-Z Input Impedance   2.2M ohms
Internal Output Impedance   600 ohms
Gain/Levels
Gain Range for Unit   -Infinity to 70dBu
Mic Range Gain Pot   10 ~ 60 dBu
Line Range Gain Pot   -10 ~ 40 dBu
Hi-Z Range Gain Pot   -10 ~ 40 dBu
Maximum Mic Input Level Gain @min SS   +18 dBu
Maximum Mic Input Level Gain @min Tube 1% THD   -7 dBu dBu +8 dBu w/pad
Maximum Line Input Level Gain @ Min SS   +30
Maximum Line Input Level Gain @ Min Tube 1% THD   +8 dBu
Maximum Hi-Z Input Level Gain Min SS   +18
Maximum Hi-Z Input Level Gain Min Tube 1% THD   +8 dBu
Maximum Output Level into 600 ohms   +18 dBu
Maximum Output Level into 100k ohms   +28 dBu
Tube Clipping Level   Same as Max In
Solid-State Clipping Level   Same as Max In
Frequency Response
Mic Frequency Response   20Hz to 100kHz +/- 0.2 dBu
Line Frequency Response   20Hz to 100kHz +/- 0.2 dBu
Hi-Z Frequency Response   20Hz to 100kHz +/- 0.2 dBu
Distortion
Min THD+Noise @ +4dBU   0.1% tube 0.005% solid-state

Alternativer til dette produktet:

Universal Audio Solo 610

Universal Audio Solo 610
kr 10 795 inkl. mva. kr 8 636 eks. mva.

Alctron MP100 V2

Alctron MP100 V2
kr 4 395 inkl. mva. kr 3 516 eks. mva.

BAE 1073 DMP

BAE 1073 DMP
kr 14 495 inkl. mva. kr 11 596 eks. mva.